Embedded Ethernet Connectivity (Optional)

Dual Display with Bright Color-Changing Feature

Programmable Digital Filter

2 Control or Alarm Outputs (Choice of DC Pulse, Solid State Relays, Mechanical Relays, Analog Voltage and Current)

A/D ConversionDual Slope

Accuracy± 0.5 °C (± 0.9 °F)

Accuracy Detail± 0.5°C temp

0.03% rdg

Additional Features 1Dual Display Horizontal, Built-In Excitation, Front Removable

ApprovalsUL, C-UL, CE per 2014/35/EU

CMRR120 dB

Control CharacteristicsAction: Reverse (heat) or direct (cool) Modes: Time and amplitude proportional control

selectable manual or auto PID, proportional, proportional with integral, proportional with derivative and anti-reset Windup, and on/off Rate: 0 to 399.9 s Reset: 0 to 3999 s Cycle Time: 1 to 199 s

set to 0 for on/off Gain: 0.5 to 100% of span

setpoints 1 or 2 Damping: 0000 to 0008 Soak: 00.00 to 99.59 (HH:MM), or OFF Ramp to Setpoint: 00.00 to 99.59 (HH:MM), or OFF Auto Tune: Operator initiated from front pane

Control OutputSPDT Relay, Alarm

Cutout Dimensions45 x 92 mm

Decimal Selection0,001, 0,01, 0,1, None

Digital FilterProgrammable

Display Size46 mm (1.8 in)

Display Type4 Digit LED

Display Type Note4-digit 9-segment LED 10.2 mm (0.40")

i32, i16, i16D, i8DV 21 mm (0.83")

i8 10.2 mm (0.40") and 21 mm (0.83")

i8DH RED, GREEN, and AMBER programmable colors for process variable, setpoint and temperature units

Enclosure RatingsNEMA Type 1

Height48 mm

Impedance Input10 MΩ for 100 mV

1 MΩ for 1V or 10 Vdc

Input ConfigurationSingle-ended

Input TypeThermocouple, RTD, mA, Voltage

Input Voltage0 to 100 mV, 0 to 1 Vdc, 0 to 10 Vdc

IsolationPower to Input/Output: 2300 Vac per 1 minute test For Low Voltage Power Option: 1500 Vac per 1 minute test Power to Relay/SSR Output: 2300 Vac per 1 minute test Relay/SSR to Relay/SSR Output: 2300 Vac per 1 minute test RS232/485 to Input/Output: 500 Vac per 1 minute test

Length127 mm

Current, Max0 to 20 mA (5 Ω load)

NMRR60 dB

Number of Inputs4

Offset Adjustment-1999 to 9999

Operating Temperature, Max50 °C

Operating Temperature, Min0 °C

Output DetailRelay/Relay

Relay: 250 Vac or 30 Vdc @ 3 A (resistive load)

configurable for on/off, PID and ramp and soak Output 1: SPDT, can be configured as alarm 1 output Output 2: SPDT, can be configured as alarm 2 output Isolated Analog Voltage and Current Current: 10 V max @ 20 mA output Voltage: 20 mA max for 0 to 10 V output

Output SignalCurrent, Voltage

PolarityUnipolar

Resolution1°/0.1°

10 µV process

RTD Type100/500/1000Ω Pt sensor

2-, 3- or 4-wire

α=0.00385 or 0.00392

Sampling Rate3 Hz (3 updates/second)

Set Point AdjustmentMenu Configurable

Span Adjustment0.001 to 9999 counts

Step Response0.7 sec for 99.9%

Supply Power Note90 to 240 Vac ± 10%, 50 to 400 Hz*, 110 to 300 Vdc, equivalent voltage Low Voltage Power Option: 24 Vac**, 12 to 36 Vdc for DPi/CNi/DPiS/CNiS

20 to 36 Vdc for dual display, ethernet and isolated analog output from qualified safety approved source

Supply Power TypeAC

Supply Voltage90 to 240 Vac

Temperature StabilityRTD: 0.04°C/°C

TC @ 25°C (77°F): 0.05°C/°C

Cold Junction Compensation

Process: 50 ppm/°C

Thermocouple Lead Resistance, Max100 Ω

Thermocouple TypeJ, K, T, E, R, S, B, C, N, L (J DIN)

Weight295 g

Width96 mm