nVent Hoffman ESFM408 A swing frame for 19-inch equipment that provides additional mounting space for such equipment, as well as rear access to the fitted components and equipment once opened. It also provides extra space for cabling purposes and increases the useful depth for equipment to be fixed to the swing frame.Feature: middle mounted swing frame, for floor standing enclosuresAdvantage: additional surface for the installation of 19-inch equipment, within a hinged frameBenefit: the frame allows customers to install equipment and components into floor standing enclosures efficiently by maximising the installation space available; access can be gained to the front and rear of the equipment installed in the frame, as well as to the components installed behind on the mounting plate, when the frame is openedComment: the transversal support bars, ESFB, must be mounted in combination with the middle mounted swing frame. 180-degree hinges are included with the swing frame as standard; if there is not enough useful depth for the equipment installed on the 19-inch swing frame, it can be increased by moving the 19-inch swing frame to one side of the enclosure by using the side mounted swing frame, ESFSMaximum load: 1800 N (405), supplied with a self-positioning deviceLock: double-bit 3 mm espagnolette (other lock options possible)Mounting requirements: ESFM for 800mm (31) and 1000mm (39) wide steel, combinable enclosures; add ESFB for mounting in a steel, combinable enclosure