Strain &  Bridge Inputs, 6 Digit Display and Upgraded Platinum Software Now Available

Super High Performance (20 Samples / Sec), High Accuracy

Extremely Versatile yet Easy and Intuitive to Use

Bright 3-Color (RED, GREEN, and AMBER) 9 Segment LED Display with Wide Viewing Angle

A/D Conversion24-bit sigma delta

Accuracy0.03 % FS

Additional Features 1Programmable 3 Color Display

ApprovalsUL, cUL, CE, UKCA

CMRR120 dB

ConfigurationDifferential

Cutout Dimensions45 mm

Data Interface NoteEthernet Standards Compliance: IEEE 802.3 10/100 Base-T auto-switching, TCP/IP, ARP, HTTPGET Protocols: OMEGA ASCII, MODBUS® ASCII/RTU

Digital FilterProgrammable

Display Range-1999 to 9999

External Fuse RequiredTime-Delay, UL 248-14 Listed: 100 mA/250 V

400 mA/250 V (low voltage option)

Time-Lag, IEC 127-3 Recognized: 100 mA/250 V

400 mA/250 V (low voltage option)

Frequency50 to 400 Hz

Height48 mm

Impedance InputProcess/Strain: 10M Ω for ±100 mV, 1M Ω for other voltage ranges

Process Current: 5 Ω

Thermocouple: 10K Ω max

Input Current4 to 20 mA, 0 to 24 mA

Input TypeThermocouple, RTD, Thermistor, Current, Voltage, Strain

Input Voltage-100 to 100 mV, -1 to 1 V, -10 to 10 Vdc

IsolationPower to Input/Output: 2300 Vac per 1 min test

1500 Vac per 1 min test (low voltage/power option) Power to Relays/SSR Outputs: 2300 Vac per 1 min test Relays/SSR to Relay/SSR Outputs: 2300 Vac per 1 min test RS232/RS485 to Inputs/Outputs: 500 Vac per 1 min test

Length127 mm

Measuring RangeProcess Voltage: ±50 mV, ±100 mV, ±1, ±10 Vdc

Process Current: Scalable within 0 to 24 mA

Thermocouple

Type J: -210 to 1200 °C

Type K: -270 to 160 °C and -160 to 1372 °C

Type T: -270 to -190 °C and -190 to 400 °C

Type E: -270 to -220 °C and -220 to 1000 °C

Type R: -50 to 40 °C and 40 to 1788 °C

Type S: -50 to 100 °C and 100 to 1768 °C

Type B: 100 to 640 °C and 640 to 1820 °C

Type C: 0 to 2320 °C

Type N: -250 to -100 °C and -100 to 1300 °C

RTD

Pt, 0.00385, 100 Ω, 500 Ω, 1000 Ω: -200 to 850 °C

Pt, 0.003916, 100 Ω: -200 to 660 °C

Pt, 0.00392, 100 Ω : -200 to 660 °C

Thermistor

2252 Ω: -40 to 120 °C

5K Ω: -30 to 140 °C

10K Ω: -20 to 150 °C

Number of Inputs1

Operating Temperature, Max50 °C

Operating Temperature, Min0 °C

Operating Temperature Note0 to 50°C (32 to 122°F), 90% RH non-condensing

PolarityBipolar

Power Consumption4 W

Reading Rate20/sec

Relative Humidity0.9

Resolution0.1° temperature

10 µV process

RTD Input Range100/500/1000 Ω Pt sensor, 2-, 3- or 4-wire

0.00385, 0.00392 (100 Ω only), or 0.003916 (100 Ω only) curves

Sampling Rate20 Hz (20 updates/second)

Sensor/Transmitter Power5, 10, 12 and 24 Vdc @ 25 mA

Sensor/Transmitter Power NoteFirmware selectable (no jumpers to set) to 5, 10, 12, and 24 Vdc @ 25 mA

Strain Input± 50 mV, ± 100 mV

Supply Power Note90 to 240 Vac ±10%, 50 to 400 Hz*, 110 to 375 Vdc, equivalent voltage

Temperature StabilityRTD: 0.04°C/°C

TC@ 25°C (77°F): 0.05°C/°C

Cold Junction Compensation Process: 50 ppm/°C

Thermistor Input Range2252 Ω, 5K Ω, 10K Ω

Thermocouple TypeJ, K, T, E, R, S, B, C, N

Warm Up Time30 mins

Width48 mm