Field-Configurable Universal Inputs

Autotuning, Direct or Reverse-Acting for Both Outputs

User-Selectable Ramp to Setpoint

8 Ramp and 8 Soak Segments

Accuracy± 0.2 %

Accuracy Detail± 0.2% FS, ± 1 digit

CMRR100 dB

Cold Junction Compensation0.05°C/°C ambient

ContactsTwin bifurcated

Control CharacteristicsSet point Limits: Limited to configured range for thermocouple and RTD

limited to scaled range

Alarms: Adjustable for high/low

selectable process or deviation

Rate (Derivative): 0 to 2400 seconds

Reset (Integral): 0 to 9600 seconds

Cycle Time: 0.2 to 120 seconds

Proportional Band: 1 to span of sensor

Dead band: Negative span to positive span of sensor

Hysteresis: 1 to span of sensor

Autotune Damping: Adjustable (low, normal, or high)

Ramp to Set point: 1 to 9999 minutes

Autotune: Operator-initiated from front panel

Manual Control: Operator-initiated from front panel

Cutout Dimensions45 x 45 mm

Depth Behind Panel100 mm

Display Size9.2 mm (.36 in)

Display Type4 Digit LED

Display Type NoteDual LED—4-digit, orange: process display

green: menu/parameter display

9.2 mm (0.36")

Electrical ConnectionScrew Terminal

Enclosure RatingsIP65, NEMA Type 4X

Events/Alarms1 to 8

Form factor1/16 DIN

Hardware and Software Requirements, MinCN8-SW (Optional Software): Minimum Hardware and Software Requirements: IBM PC or 100% compatible, Windows 95/98/NT

RS485 interface or RS232 to RS485 converter

Software Compatibility: CN8200 Series controllers

Software Capability: Supports up to 254 CN8200 Series controllers

Height53.3 mm

Input TypeThermocouple, RTD, mA, Voltage

Input Type NoteInput Type: See input table on next page Digital Input: For remote setpoint, remote standby or ramp/soak run and hold Thermocouple Lead Resistance: 100 Ω maximum for rated accuracy Decimal Position: Selectable

Length8.21 mm

Loops0 to 99

Measurement TypeCurrent, Temperature, Voltage

Measuring RangeType J (Iron-Constantan): -200 to 760°C, Type K (CHROMEGA®-ALOMEGA®): -270 to 1354°C, Type T (Copper-Constantan): -270 to 400°C, Type N (OMEGALLOY®) : -268 to 1300°C, Type R (Pt/13%Rh-Pt) : -50 to 1768°C, Type S (Pt/10%Rh-Pt) : -50 to 1768°C, Type B (Pt/30%Rh-Pt/6%Rh) : 0 to 1820°C, Type C (W/5%Re-W/26%Re) : 0 to 2315°C, Type E (CHROMEGA®-Constantan) : -150 to 1000°C, NNM 18% molybdenum vs nickel -06% cobalt : 0 to 1410°, Platinel II : -100 to 1232°C, RTD ((3-wire) 100 Ω Pt) : -200 to 850°C, RTD ((3-wire) 100 Ω Pt) : -199.9 to 375.0°C, 0 to 1V : Scalable (-1999 to 9999) selectable 1 to 5V : Scalable (-1999 to 9999) selectable 0 to 5V : Scalable (-1999 to 9999) selectable 0 to 10V : Scalable (-1999 to 9999) selectable 10 to 50 mV : Scalable (-1999 to 9999) selectable 0 to 50 mV : Scalable (-1999 to 9999) selectable 0 to 10 mV : Scalable (-1999 to 9999) selectable 0 to 100 mV : Scalable (-1999 to 9999) selectable 4 to 20 mA : Scalable (-1999 to 9999) selectable 0 to 20 mA : Scalable (-1999 to 9999) selectable

Memory BackupSolid State

Number of Inputs1

Operating Temperature, Max55 °C

Operating Temperature, Min0 °C

Ramp and Soak8 Ramp & Soak

Ramp Setpoint1 to 9999 minutes

Ramp/Soak Time0 to 9999 minutes

Relative Humidity90% RH, non-condensing

Repeatability± 1 count

Sampling Rate10 Hz (10 updates/second)

Series Mode Rejection>70 dB

Setpoint Resolution1 count/0.1 count

Supply Power Note100 to 250V, 50/60 Hz (single-phase)

120 to 250 Vdc, 24 Vac/24 Vdc (optional)

Temperature Stability5 μV/°C Max

Weight226 g

Width53.3 mm