- About
- Description
- Specifications
- Features
- Downloads
- Shipping
Images are for illustration only and may not reflect the actual product. Refer to the description or specs.
Code: 112994
Schneider Electric 9421V1A30 Manual Motor Controller, TeSys Vario, rotary handle, 20A, 3 pole, 10 HP at 600 V, metallic enclosure, UL Type 12
Normally In Stock
Schneider 9421V1A30 VARIO Operator Mechanisms Type L UL 489 Rotary Handle Circuit Breaker Mechanisms 9421L Operating Mechanisms
Condition: New
CALL FOR LEAD TIME$199.06
Sale Price
$165.88
Tariff Status
Tariff may apply if shipping to the United States. Tariff costs are calculated and will be displayed in the shopping cart.
Need a large quantity or a custom solution?
Add this product to your job, favorites list or request a quick quote for volume pricing and lead time information. Our team is ready to assist with any special requirements.
Description
Manual Motor Controller, TeSys Vario, rotary handle, 20A, 3 pole, 10 HP at 600 V, metallic enclosure, UL Type 12
Specifications
Manufacturer
Schneider Electric
Component
Rotary Handle
Features
Vario manual motor control switches meet UL508 requirements as both enclosed and open manual motor controllers
They are also marked “Suitable as Motor Disconnect” allowing installation on the load side of the motor branch circuit short circuit and ground fault protection
These manual motor control switches include switches mounted in enclosure with a handle
The switch has a 20A current rating and a 5 HP at 240 V, 10 HP at 480V and a 10 HP at 600V ratings per UL508
The switch has a 32A current rating and a 5.5 kW at 230V and 240 V, 11 kW at 400V 415V and 500V and a 15 kW at 690V ratings per IEC
A KCD1YZ low profile handle is used for this device
This 60 mm by 60 mm single hole handle assembly has a red handle and yellow bezel
This switch is mounted in a metallic NEMA Type 12 enclosure
This manual motor control switch is 7.38 inches tall, 5.50 inches wide and 6.25 inches deep
This switch has no auxiliary contacts
This manual motor control switch is UL Listed and CSA certified.
Downloads
Code: 112994
Schneider Electric 9421V1A30 Manual Motor Controller, TeSys Vario, rotary handle, 20A, 3 pole, 10 HP at 600 V, metallic enclosure, UL Type 12
$199.06
Sale Price
$165.88