- About
- Description
- Specifications
- Features
- Downloads
- Shipping



Images are for illustration only and may not reflect the actual product. Refer to the description or specs.
ACI 125955 CTS-M5130X-Q0R0000 Oxygen Room Gas
Normally In Stock
Code: 175666
ACI 125955 Toxic Gas Sensor, Room, Oxygen, 0-25% Volume, 4-20mA, 2-10VDC Output, or Modbus RTU, LCD, Relay & Buzzer
Condition: New
Usually ships Same Day or Next Day$931.36
Sale Price
$776.13
Tariff Status
Tariff may apply if shipping to the United States. Tariff costs are calculated and will be displayed in the shopping cart.
Need a large quantity or a custom solution?
Add this product to your job, favorites list or request a quick quote for volume pricing and lead time information. Our team is ready to assist with any special requirements.
Description
The CTS-M5 Series has a microprocessor based transmitter. It uses an Electrochemical gas sensor to monitor a variety of gases. The CTS-M5 Series offers great value since it includes many standard features that can only be found as expensive options in other manufacturer's models. A digital display (LCD), push-button programming and on-board meter jacks are all standard. The transmitter provides an analog output of 4-20 mA DC or 2-10 VDC, proportional to the measured gas range, for transmission to the Building Automation System. The CTS-M5 Series offers flexibility and simplicity in one package. The relay setpoints may be seen as increasing or decreasing actuation simply by adjusting the deadband relationship. Set the deactuation point above the actuation setpoint and the CTS-M5 will automatically alarm on decreasing concentrations. Plus, calibration is extremely simple. First, apply the calibration gas and then adjust the potentiometer to the desired reading on the display. The CTS-M5 Series is covered by ACI's Two (2) Year Limited Warranty. Toxic gas sensors or transmitters for HVAC, Building Automation Systems, or OSHA standards.
Specifications
Manufacturer
ACI
Component
Gas
(Instrument-Sensor) Type
Oxygen
Features
The CTS-M5 Series has a microprocessor based transmitter that uses an Electrochemical gas sensor to monitor Oxygen or Ammonia
The CTS-M5 Series offers great value since it includes many standard features
A digital display (LCD), push-button programming and on-board meter jacks are all standard
The transmitter provides an analog output of 4-20 mA or 2-10 VDC, proportional to the measured gas range, for transmission to the building management system
The CTS-M5 Series offers exibility and simplicity in one package
The relay setpoints may be seen as increasing or decreasing actuation simply by adjusting the deadband relationship
Set the deactuation point above the actuation setpoint and the CTS-M5 will automatically alarm on decreasing concentrations
Refer to all applicable Federal, State, Provincial and Local Health and Safety laws and regulations before using these products
CTS-M5 is not compatible with the Q4CII , M-Controller 2, or Q-controllers
Not compatible with Modbus RTU communication

Code: 175666
ACI 125955 CTS-M5130X-Q0R0000 Oxygen Room Gas
$931.36
Sale Price
$776.13