
InterSafe Data Interface

Network communication is the backbone of many industrial automation processes. Networks rapidly and securely transfer data between devices, PLCs and computers through servers, routers, modems and cables. It is important to have a safe and secure place to house IT equipment which also allows for easy access and provides an efficient use of space.
Rack enclosures or rack cabinets are designed for heavy, high wattage equipment that usually runs at hotter temperatures. The enclosures have vented front and rear doors that provides ample airflow. The removable side panels and front and rear doors are attached to adjustable mounting rails and lock for added security. These type of enclosures are a popular choice for server rooms and data centers.
Intersafe data interface port allows programming access to devices inside an enclosure without opening the door. This reduces the risk of energized components being exposed to the outside environment. Many configurations are standard to meet various programming and application requirements.
Products
Cutouts are very common when modifying enclosures for push buttons, indication lights, conduit entries or mounting hardware. Cutting into an enclosure runs the risk of eliminating the protective nature of the NEMA rated attributes. Proper steps must be followed in order to preserve the NEMA rating of an enclosure.
Devices mounted to the enclosure must have the same NEMA rating as the enclosure. This means that if the devices are installed to the manufacturer's specifications, they will be able to maintain the NEMA rating of the enclosure.
Water tight conduit hubs must be used when running wire through a cutout in an enclosure. There are many different types of conduit hubs that are used to secure conduit to an enclosure. However, only certain conduit hubs are rated for a watertight seal. By using water tight hubs, the NEMA rating of the enclosure is maintained.
Bonded washers are necessary when mounting hardware to an enclosure. If standard mounting hardware is used, the NEMA rating of the enclosure will no longer be maintained. Bonded washers have rubber gaskets that make a watertight seal around the drilled hole. It is also important to make sure the material used for the bonded washer matches the material of the enclosure. Stainless steel enclosures require stainless steel bonded washers.