Images are for illustration only and may not reflect the actual product. Refer to the description or specs.
Downloads
Mulogic DSL4608SEth24v Digital Subscriber Line Ethernet Modem
Mulogic DSL4608S.Eth24v Standalone Digital Subscriber Line Ethernet Modem 12V-24Vdc (10-36V) or (100-240Vac with power adapter sold seperatly). High speed remote access via to private or public networks. For unconditioned metallic or copper(Dry Copper) Lines(2 wire or 4 wire operation).
Normally In Stock! Order now!
Condition: New
Usually ships within 2 days
Price: $1416.00
Sale Price:
$1239.00
Mulogic DSL4608S.Eth24v Standalone Digital Subscriber Line Ethernet Modem. Be it for connecting just two Ethernet devices, for connecting a remote Ethernet device to a LAN or even for connecting two LANs, the DSL-4608S.Eth can be used for any device equipped with an Ethernet port: from Personal Computer to PLC. Used to bridge Ethernet data over communication lines. SDSL technology for high speed (up to 4608 kbit/) point-to-point transmission on private and public dry copper wire lines. The maximum distance and data rate mainly depends on the gauge (diameter) of the copper wire. Using cable of 5 mm (AWG24) copper wire gauge,the modem has a reach of over 7.5 miles at its lower rates and will operate at a rate of 4608 kbit/s using 2 pairs of copper over distances up to 3 miles. At larger wire diameters the reach is even longer. Operating temperature of -4 F to 140 F. Automatic learning Ethernet bridge with Spanning-tree link management protocol. Protocol independent. No routing configuration needed. Configuration and control by: frontpanel,web browser,telnet connection,or serial port. The modem offers a transparent link for Ethernet protocols regardless of the higher level protocol. It is,therefore,transparent to protocols like TCP/IP,Modbus/TCP,or any protocol used over Ethernet.
| Specifications | |
| (Modem/Router) Type | Digital Subscriber Line Modem |
| (Modem/Router) Mounting | Standalone |
| (Modem/Router) Case Type | Plastic |
| (Modem/Router) Data Type | Ethernet |
| (Modem/Router) Data Rate Serial | 4608 Kbps |
| (Modem/Router) Ethernet Ports | 1 Ethernet Port |
| (Modem/Router) USB Ports | No USB 2.0 Ports |
| (Modem/Router) Low Temperature Range | -4 F |
| (Modem/Router) High Temperature Range | 140 F |
| Component | ADSL Modem |
| (Modem/Router) Voltage Rating | 12 Volt |
| Manufacturer | Mulogic |
| (Modem/Router) Voltage Rating | 24 Volt |
Customer Reviews
0.0
All Reviews
Usually ships within 2 days
Related Products
$864.00
MCF-16.3 3U(5.25") tall 16 slot 19" industrial rack with backbone with slots for up to 16 modem cards. It can be used for LLM-336R and DLM-336R modem rack cards operating in asynchronous serial data mode. It is equipped with 8-pin modular jack connectors for both serial data interface and line connection. By request the rack can be delivered with a screw terminal connector for using the RS485 interfaces of teh LLM-336R modem on a RS485 bus. Electrical power is aquired by screw terminal connectors. Power range can be 9-36Vdc,10-28Vac,or 18-36VDC depending on the modem used.
$512.00
UCF-16.3 3U(5.25") tall 16 slot 19"universal rack (without top cover) with no back plane so that all connections including the power are made externally with slots for up to 16 modem cards or IOC-PSU7T power supply units. It can be used for the LLM-336R,LLM-336R.Eth,DLM-336R,and DSL-4608R modem card sets. The UCF-16.3 card frame allows for flexible housing of a mix of various MuLogic products,without a PSU or with a single or dual PSU. The screw terminal sockets (2 per panel),allow for a very flexible power supply arrangement,such as "daisy chaining",feeding from different sources,looping etc. All MuLogic rack cards can be powered directly from 9-36Vdc (10-28Vac) or 18-72Vdc sources. If these voltages are not available,mains power supplies can be mounted inside the rack,in an additional UCF-16.3 rack or standalone (e.g. DIN-rail mounted PSUs or AC transformers).
$472.00
PSU-2460S Power Supply 24V-60W PSU with strip for all slots for UCF-16.3 used in conjunction with IOC-PSU7T.
$131.20
IOC-PSU7T Power entry unit for (UCF-16.3) for use with PSU-2406S